Screen Kit for the Power House Ice Eater
The Power House Screen Kit will protect your Ice Eater and Surface Aerator's from ice, debris and wildlife.
This 1″ grid plastic coated, hot rolled metal screen kit will help protect your investment by preventing foreign objects from entering the shroud while remaining wildlife friendly so you can be confident it will be operational when you need it the most.
Don’t leave yourself vulnerable to broken propellers or blown out motors; Protect yourself and install Bearon Aquatics’ Screen Kit Accessory.
Installation Guide:
- Screen Kit comes with necessary hardware (4 plastic clips and 4 screws) to install to either your Ice Eater or Surface Aerator.
- Refer to the Size Chart on where you can place them and what size to purchase.
- All you will need is a #2 Phillips head screwdriver, and drill with a 3/32 drill bit.
- Put your clips on as shown in the picture, drill a pilot hole, and fasten the screw into place.
- Work your way around the unit until all four (4) clips are screwed into place.
SCREEN KIT SPECIFICATIONS:
- SMALL – fits 10″ diameter shrouds
Fits on top & bottom of P500 Ice Eater - LARGE – fits 12″ diameter shrouds
Fits on the top of F500, F750DP, F1000DP Surface Aerator
Fits on the top & bottom of P750, & P1000 Ice Eater - Made in the USA
*Ice Eater sold separately.
California Prop 65 Warning
Crude oil, gasoline, diesel fuel and other petroleum products can expose you to chemicals including toluene and benzene, which are known to the State of California to cause cancer and birth defects or other reproduction harm. These exposures can occur in and around oil fields, refineries, chemical plants, transport and storage operations such as pipelines, marline terminals, tan trucks, and other facilities & equipment. For more information go to: www.P65Warnings.ca.gov/petroleum.
Questions & Answers
Have a Question?
Be the first to ask a question about this.