Scott Aerator DA-20 Display Fountain Aerator 1/3HP
Have a small pond (3/4-acre or less) that's begging for a beautiful, serene-sounding water feature? The 1/3-hp DA-20 Display Aerator was made for you.
The new 1/3-hp model keeps small ones interesting to look at, pleasant to listen to, oxygenated and insect-free. Moving 300 gallons of water per minute in a cascading, trumpet-shaped spray, it sweeps algae from the surface, keeps water clean and clear, repels pesky insects, and helps keep fish healthy, muck broken up and your pond bottom clean.
The default spray pattern of the 1/3-hp model measures approximately 5 feet tall and 18 feet wide. Larger patterns with higher flow rates are available by upgrading in motor size.
The DA-20 features a stainless-steel, oil-free, submersible motor, making it the most environmentally friendly water aerator on the market. And, with no oil to add or change and no control box required, it's maintenance-free! The DA-20 is even easy to install, requiring just two anchoring ropes and weights or tethers.
Perhaps best of all, the DA-20 is engineered to be left in the water year-round. You'll never need to remove it in fall or re-install in the spring. Simply shut the DA-20 off, allow it to freeze in and forget about it until the thaw. Freezing water does no damage to the DA-20, even in the harshest winter.
Proudly manufactured in the USA, the DA-20 carries an unconditional, 5-year motor warranty. This unit is produced with 70 feet of submersible, 12-gauge power cable. Longer lengths are available, and special orders are never a problem.
Designed for fresh and salt water.
GFCI required. Please disconnect the power source when swimmers are present.
Features:
- 5-year motor warranty.
- No maintenance required.
- 115 or 230volt, 1/3-hp, oil-free motor.
- 300 gallons-per-minute flow rate.
- Default spray pattern measures 5 feet high and 18 feet wide.
- Electric cable provided is 70 feet long, 12-gauge submersible, with plug.
- Electric cable can be ordered in longer lengths.
- Optional Light kits can be purchased separately.
- Approved for saltwater.
- Two 30-pound weights or concrete blocks required for anchoring (not included).
- Two nylon ropes required for anchoring (not included).
- Designed for 24-hour-per-day operation or with a timer.
- Great for ponds up to ¾ acre in size.
- 32″ minimum pond depth required.
- Motor specs: 60 Hz, single-phase, 8 amps, 670 watts, 3450 RPM
Useful Info:
